Jeracenter

New bulletin from Aerodyne regarding the "Icon's" harnesses. This is mandatory and must be completed before the next jump.

https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.flyaerodyne.com%2Fe_files%2Fcontent%2FSERVICE_BULLETIN_-_30042026_-_AAD_V1.pdf%3Ffbclid%3DIwZXh0bgNhZW0CMTAAYnJpZBExZjU3alFuQ2JmQmJudFl5c3NydGMGYXBwX2lkEDIyMjAzOTE3ODgyMDA4OTIAAR7xg0RmVcw0eFHL78z9aFQWlNZamXzo9xg0Ul6TBCWrhwSVsCVM8e6ZVxMPjA_aem_dv6VcZB4a5f8B1dai4cV_w&h=AUC_pMdT0gx3DPQSnvS4S6cphMLofB8OaL144ZrAFE_c2Ns1weKmJsefJsIiHYnU1miesNcUAFBZ59JPjZTZELeKaIrwo3gvi32HXHTNo2q0-ESye6xHTzXhM0xogeBGnlF4Fh6Ppwbnsc026GTiIrrte9Qb--Qun4g&__tn__=-UK-R&c[0]=AUA03GoQuYAv-fXofBjlaGPXGCqIJBxSGbJar8_yNyBeEctxNPA5c0uvl0VemJaRL0LiQpQB3_7BuADFqBkqTrFVwpCDlwC6RZDOkDZ__cfq-c6t5aVc6v6e9cc3Gf9zCWbATLy3nDT2pyuWRbMPcrqhatZ7BKwuB_Y3-V_x2nWeSO8rNo4Qad7j

www.flyaerodyne.com

Process for reserve closing loops.
Reserve loop are always dipped in a special silicone about 1,5 inches from the top.
Minimum for 24 hours.
With the cloth, we remove the excess silicone from the reserve loop.
So to maximize the smoothness of its surface, giving it even less friction passing through the reserve container grommets and the cutter.

Today,
To replace a BOC from a sigma harness.

When replacing lines or re-lining the main, we put a stabilizer bar track on the slider stops.
This is a 72 stitch.
We can re-line all types of lines starting with 300 vectran and using the original stitching pattern from the manufacturer

Test stitching before starting the production of harnesses

How does work a Cypres…

CYPRES Animation of Components and Activation Perhaps you are a newer jumper or even an experienced jumper that is not too familiar with the physical characteristics of the CYPRES beyond interacting with...